LC29H(AA) Dual-Band GPS HAT for Raspberry Pi

This (AA) GPS HAT has high signal multipath effects like urban canyons, thanks to its ability to track L1+L5 dual-frequency and multi-GNSS signals, significantly upgrading positioning accuracy. It features a built-in Low Noise Amplifier (LNA) and Surface Acoustic Wave (SAW) filter, providing high sensitivity and robust anti-interference capabilities.

It has dual-band positioning and Real-Time Kinematic (RTK) technology, catering to projects needing centimeter-level precision such as drones, smart agricultural machinery, and shared mobility solutions like two-wheelers. It's also good for real-time tracking systems.

There is a standard Raspberry Pi 40-pin GPIO extension header, supporting not only Raspberry Pi series boards but also the Jetson Nano. It also supports the simultaneous tracking of multiple satellite signals and systems (GPS, BDS, GLONASS, Galileo, and QZSS), all while maintaining low power consumption. It also includes support for various positioning augmentation systems like WAAS, EGNOS, MSAS, and GAGAN, which enhance service area performance. The EASY technology further allows for efficient positioning using stored ephemeris and almanac data when signals are unavailable, improving both the positioning accuracy and time to first fix.

We also have the LC29H(BS) GPS/RTK HAT to setup an RTK base station

Note: Raspberry Pi boards are NOT included

Features

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
• Supports simultaneous tracking of L1+L5 dual-band satellite signals, reducing multipath effects in urban canyons and improving positioning accuracy
• Supports concurrent receiving of multi-GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption
• Supports positioning augmentation systems (WAAS, EGNOS, MSAS and GAGAN) to improve the positioning performance of service areas
• Supports EASY technology, to realize the positioning using stored information such as ephemeris and almanac data when there is no signal, and improve the positioning and time to first fix
• Built-in low noise amplifier and acoustic surface filter to realize -165dBm high sensitivity and enhance anti-interference performance
• Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy
• A-GNSS (Assisted GNSS) support, reducing the time to first fix (TTFF) with a cold start when powered on to 5 seconds
• Support QGNSS software, easy to set various module functions
• Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
• Onboard 4 LED indicators for module operating status
• Comes with online development resources and manual (Python examples for Raspberry Pi/Jetson Nano)

What's on Board

1. LC29H module
2. RT9166A-28PXL
   5V to 2.8V LDO chip
3. CP2102N
   USB to UART chip
4. Raspberry Pi 40PIN GPIO header
   For connecting with Raspberry Pi
5. UART selection jumper
   A: control the LC29H via USB to UART
   B: control the LC29H via Raspberry Pi
   C: access Raspberry Pi via USB to UART
6. IPEX 1 connector
   LC29H module antenna connector
7. Micro USB interface
8. RT9193-33PB
   5V to 3.3V LDO chip
9. RESET button
   Reset the LC29H module
10. Status Indicators
    PWR: Power Indicator
    RXD/TXD: UART transceiver indicator
    PPS: GPS status indicator
11. NDC7002N
    I2C voltage translator
12. ML1220 Battery holder
    Supports ML1220 rechargeable cell, for preserving ephemeris information and hot start

Specifications

Connection Example - Raspberry Pi & GPS Antenna

Resources

• Product Wiki

Pinout

Package Contents

1. 1x LC29H (AA) GPS HAT
2. 1x 2 x 20-pin female header
3. 1x GPS External Antenna (D)
4. 1x IPEX 1 to SMA cable ~17cm
5. 1x Screws pack