Skip to content
Uninterruptible Power Supply UPS HAT For Raspberry Pi Zero
Price:
Sale price
£25.90
Stock:
Awesome Extras
This Uninterruptable Power Supply HAT (UPS HAT) for the Raspberry Pi Zero (or any Zero with pins soldered on) comes with a 1,000mAh Li-Po battery and incorporates a Li-Po battery switching charger with path management, a voltage boost chip and a voltage/current monitor which allows monitoring the battery operating status via the I2C bus!
Note: Your Pi Zero must have a GPIO pin header soldered on - otherwise the PoGo Pins won't reach!
Without other devices/hardware connected, and when in standby mode, the battery can feed the original Pi Zero WH for approximately 6-7 hours after fully charging**.
Convenient 'Pogo Pins' are used to connect the HAT to the underside of your Pi Zero WH, leaving the GPIO header free for pHATs and other hardware. A handy LED recharging indicator lets you know what status your battery is in, whilst the onboard power switch allows you to control power in a quick and convenient way.
Uninterruptable Power
The HAT is able to recharge the battery and provide power output to your Pi Zero WH at the same time from an external power supply. It automatically switches over to battery power if the external power supply is unavailable, keeping your project running without any break in power.
Real-time Monitoring
Monitor the battery voltage, current, power and remaining capacity via I2C!
Lithium Battery Shipping:Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart your shipping options will be limited and may cost more than our usual rates. Why?
Features
- Onboard pogo pins for connecting with Raspberry Pi Zero WH (or any Zero with pins soldered on)
- Li-po battery recharge chip with dynamic path management for a more stable power supply
- Voltage boost chip, providing a regulated 5V power output
- I2C bus communication for monitoring the battery voltage, current, power and remaining capacity in real-time
- Multi-battery protection circuits: overcharge/discharge protection, over current protection and short circuit protection
- Recharging indicator for monitoring the battery operating status
- Online development resources and manual
Package Contents
- 1x UPS HAT (C)
- 1x 1000mAh Li-Po battery
- 1x Screws pack
Raspberry Pi Zero WH not included
Resources
What's Onboard?
1) ETA6003: recharge manager
2) TPS61088: voltage boost chip
3) INA219: voltage/current monitor
4) S8261: Li-po battery protection chip
5) FS8205: Li-po battery protection MOS
6) Pogo pins: for connecting with Raspberry Pi Zero
7) USB recharge port: 5V charger input
8) Battery header: for connecting 803040 Li-po battery
9) Power indicator
10) Recharging indicator
Specification
- Compatible with Pi Zero WH only (or any Zero with pins soldered on)
- Output Voltage: 5V
- Output current: up to 1.8A (with a fully charged battery in ideal conditions)
- Control Bus: I2C
- Mounting hole size: 3mm (M3)
- Charger: 5V
- Battery: 803040 Li-po Battery, 1000mAh 3.7V
- Outline Dimensions: 65mm x 30mm
Pinout Definition
** Many factors can influence this timescale and performance, your mileage may vary! Newer models of the Raspberry Pi Zero will use more current and may experience a shorter running time.
Payment & Accreditations
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Accreditations
5.00
Based on 6 reviews
Write Review
Sort
Clear Filters
Order By
Newest First
Oldest First
Most Popular
Highest Rating
Breakdown
6
0
0
0
0
Product Reviews
Uninterruptible Power Supply UPS HAT For Raspberry Pi Zero
Fantastic solution to PI zero (and zero2) UPS and battery management. So easy to connect up, I had the headerless zero2 so had to solder on 6 pins so the UPS' pogo pins work (as stated in the listing). Its working brilliantly and the I2C python example gives me full access to voltages and currents and charge status so it can notify me if things go wrong and still give me plenty of time (several hours) before it cuts out. Graceful shutdown wouldnt be hard to implement too if thats what you wanted.
The fact that you can upgrade the lipo to any capacity single cell lipo is a huge bonus for future proofing.
Was this review helpful?
7 months ago
Uninterruptible Power Supply UPS HAT For Raspberry Pi Zero
5+ hours powering a pi 0W, I2C monitoring to power down gracefully. great for all sorts of things.
Was this review helpful?
1 year ago
Uninterruptible Power Supply UPS HAT For Raspberry Pi Zero
Works as advertised, and will mean I can shrink down the size of my robot car.
Was this review helpful?
3 years ago
Uninterruptible Power Supply UPS HAT For Raspberry Pi Zero
Very useful for wire free monitoring with pi-cam, particularly checking for postal deliveries on the doorstep
Was this review helpful?
3 years ago
Uninterruptible Power Supply UPS HAT For Raspberry Pi Zero
Very cool little UPS for the Pi Zero. Added to a PiHole as we've been getting powercuts more frequently and this is a neat solution to keep the server running. Easy to install and get up and running. Great service as usual from PiHit, many thanks.
2 people found this review helpful.
Was this review helpful?
3 years ago
Uninterruptible Power Supply UPS HAT For Raspberry Pi Zero
Very easy to install, this was up and working in minutes providing a UPS for my project whilst still allowing full access to the header.
1 person found this review helpful.
Was this review helpful?
3 years ago
New content loaded
